Will my PowerX Electricity work with solar panels?Updated 3 months ago
Note: Electrical panels contain high voltage and pose a risk of electrical shock or worse. PowerX Electricity should be installed by an electrician or qualified professional in compliance with all applicable local codes.
Yes, attach the 50amp additional clamps to the solar panel’s mains that lead into the circuit breaker box, and you’re good to go! Just be sure to label the clamps as solar clamps by going to:
- My devices
- Sensors & Settings
- Clamp Setup
If your solar powerlines are rated for over 50amps, you may want to purchase an additional PowerX Electricity without the hub to use one of the two 200amp clamps.
Was this article helpful?